|
|
|
Special
Attachments
|
 |
Small Pin Grips
Ideal for gripping small diameter
wires, pins, filaments, etc. Three sizes cover
a range of diameters. Max load 22 lbs (10kg).
PC-0.5 for 0 to 0.5mm dia. sample
PC-1 for 0.5 to 1.0mm dia. sample
PC-2 for 1.0 to 2.0mm dia.
sample |
|
Penetrating Pin Gauge
Use this unique attachment to check the
hardness of clay-like materials, the burst
strength of plastic coverings /skins, etc.
PG-2 2mm OD 20 lb Max Load
PG-3 3mm OD 20 lb Max Load
PG-4 4mm OD 45 lb Max Load
PG-5 5mm OD 45 lb Max Load |
 Thin
Film Grip
Use these spring- loaded film grips to
check the tensile strength of thin film
samples (up to 2mm thick). Max load is 110 lbs
(50kg).
FC-20 for 20mm wide film
FC-40 for 40mm wide film |
|
Wire Wrapping
Grip
For measuring the strength of wires,
filaments, fibers, etc. Max load is 110 lbs
(50kg). GC-30
|
Fine Point Grips
Ideal for testing small to medium gauge wire,
small components, other pull tests. 3mm max
load is 22 lbs (10kg).
SC-3 This grip can be used for
measuring the strength of ribbon, wire, etc.
8mm max load is 35 lbs (16kg).
SC-8 |
|
Tape Grip
Self tightening "buckle-type" mechanism
ensures slip-free operation. For use with
tapes to 30mm wide. Max load is 110 lbs
(50kg).
GC-60 |
Wedge Grip
This spring- loaded wedge grip is ideal for
tensile measurements of thick materials (up to
10mm thick). The serrated jaw is 15mm wide.
KC-220 Max load is 220
lbs (100 kg)
KC-500 Max load is 500
lbs (220 kg)
KC-1100 Max load is
1100 lbs (500 kg) |
|
Jacob's Chuck
For use with shafts/rods
GC-5 0.5- 5mm
Max load is 110 lbs (50kg)
GC-15 2-13mm
Max load is 220 lbs (100kg) |
Large Flat Head
Suitable for general push/crush testing.
Max load is 220 lbs (100 kg).
AA-30 30mm dia.
AA-55 55mm dia. |
|
Universal Joint
Flexible coupling fits between measuring shaft
and attachments.
Max load is 110 lbs (50kg)
UJ-6 (fits M6P1 and 10-32
shaft)
UJ-10 (fits M10P1.5
shaft) |
Peeling Attachments
Use these unique attachments to measure
the peel force of laminated materials, etc.
PF-1 pull test peeling
PF-2 push test peeling |
|
Adapter Coupling
Max load is 110 lbs (50 kg)
TJ-6 converts M6P1 shaft
to
#10-32 thd
TJ-10 converts M10P1.5
shaft to #5/16-18 thd |
Button Puller
Unique
puller adjusts to grip buttons, etc.
6 – 25mm (30 lbs max.)
BP-6 |
|
Cam Grips
Test
specimens up to 30mm wide and 2mm thick.
110 lbs max. (50kg).
GR-30 |
Wire Grip-1
The
spring loaded 20mm jaw opens to 5mm (220 lbs
max.)
WG-1 |
|
Wire Grip-2
The serrated 30mm jaw opens to 4mm.
WG-2 220 lbs max. |
|
|
|
Click Here for
Standard Attachments
|
