|
This digital pull
tester is for checking the pull-off force values of
electrical leads, crimped terminals, connectors, and
soldered parts. System comes with test stand and DPS
force gauge of your choice. Choose optional pull
test attachments wedge grip, cam grip, vise chuck,
WG-1 or WG-2 wire grip to suit your application
(other attachments available)
 WG-1
is perfect for pull testing crimp on terminals. Set
the opening size by turning the wingnut until jaws
contact sample, then back off a little until the
sample slides into the jaws from the side. Then you
can simply slide the next sample into the jaws when
you are ready to test.
WG-2 grips the actual
wire or sample tested with serrated jaws. Ideal for
a variety of shapes.
WG-3 multi terminal
grip has 12 wire gauge apertures on the turret.
Locate the appropriate size, lock in position and
you’re ready to test.
The KC-100 spring-
loaded wedge grip is ideal for tensile measurements
of thick materials (up to 10mm thick). The serrated
jaw is 15mm wide.
|
Crimp Test Attachments
|
|
 |
 |
 |
 |
|
WG-1 |
WG-2 |
WG-3 |
KC-100
|
|
 |
 |
|
GT-30 VISE CHUCK |
WG-300 CAM GRIP |
Pull Tester Ranges (Resolution)
Accuracy: ±0.2% F.S. ±1 LSD
|
Capacity (Resolution) |
Pounds
Ounces
|
Kilograms
Grams |
Newtons |
|
8.819 oz (0.001
oz) |
250.0 g (0.1 g) |
2.452 N (0.001
N) |
|
17.64 oz (0.01
oz) |
500.0 g (0.1 g) |
4.903 N (0.001
N) |
|
4.409 lb (0.001
lb) |
2.000 kg (0.001
kg) |
19.61 N (0.01
N) |
|
11.02 lb (0.01
lb) |
5.000 kg (0.001
kg) |
49.03 N (0.01
N) |
|
44.09 lb (0.01
lb) |
20.00 kg (0.01
kg) |
196.1 N (0.1 N) |
|
110.2 lb (0.1
lb) |
50.00 kg (0.01
kg) |
490.3 N (0.1 N) |
|
220.5 lb (0.1
lb) |
100.0 kg (0.1
kg) |
980 N (0.1 N) |
|
|
