MRM Precision Instruments Inc.

 

MV-220
 Motorized Vertical Test Stands

 

 

MV-220

MV-220
Force gauge sold separately

 

MV-220BA  (Basic Type)
MV-220AC (Auto Cycle Type)

Max Load: 220 lbs

  • One stand for both compression (push) and tension (pull) tests

  • Stroke: 16"

  • Auto cycle feature

  • Optional dynamic and static distance meter available

Speed Configurations

Standard Speed

.4~4"/min

Optional High Speed

.8~8"/min

Optional Low Speed

.2~2"/min

Specify speed when ordering

Dimensions

 

These motorized test stands offer consistent and reliable testing.  It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range Imada force gauges. Quick return and Emergency Stop features are also included.

 

Lexan Safety Shield

  • 1/4" unbreakable lexan

  • Helps protect personnel from injury by containing debris during testing

  • Allows access to the control panel

The lexan safety shield offers protection to the operators of motorized test stands. Access to the test stand controls is still available through the front of the shield. Made of 1/4" lexan, it is virtually unbreakable and will contain the debris from destructive testing. Helps to prevent accidental injuries. Fits all Imada motorized vertical test stands. Dimensions 16.5" x 15.75" x 31.5"

MV-220 Application

Basic Models: MV-220BA, MV-500BA
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

 

Auto Cycle Models: MV-220AC, MV-500AC, MV-1100AC
Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

 

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.
 

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.
 

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.